16 Medit T-series User Guide
Introduction and Overview
2.1 Medit Scan for Labs Introduction
Medit Scan for Labs is a software program that allows to perform model and impression scans using
the table top scanner series by Medit. Users can edit data, complement it with data from the intraoral
scanner and prepare it for the CAD/CAM processes. Explicit explanations and guide messages are
accompanying each stage on the left side of the window.
Medit Scan for Labs is to be run only on the computers that meet the specifications outlined below.
Otherwise, the device may not function properly. In case Windows is not updated before the
installation, USB 3.0 will not work properly.
※ Cautions
o This device is designed to be connected via USB 3.0 port only. Please make sure you are using
USB 3.0 for the connection.
o This device is compatible only with Windows 10 and above. It cannot be used on Mac
Operating Systems.
o Before installing the scanning S/W, please make sure that the Windows version in use,
mainboard, VGA card and USB drivers are up-to-date.
2.2 Minimum Requirements
[Minimum Requirements]
To Next Page
Loading...
