79 Medit T-series User Guide
Precautions for the User
5.1 General Precautions
This device should be used only by trained professionals.
You should have been trained on how to use the system, or you should have read and fully
understood this user guide.
▷ During Installation
This device should be used only by trained professionals.
Install the device in a dust-free environment with proper ventilation and minimum changes in air
pressure, temperature, humidity, natrium and ions.
Please take note of the safety conditions such as tilting the device, vibration or shock.
Do not install in a place of a chemical storage or near gas generating points.
Do not install in a place with poor ventilation.
Please consider the power requirements and consumption.
Ensure that all components provided are free from physical damage. Safety cannot be guaranteed if
there is any physical damage to the unit.
Install and use only approved programs to ensure proper functionality of the scanner system.
Hand Hazard
Keep Hands off while operating the equipment
• To prevent access to the moving parts, distance (1.5 M) should be maintained during the
installation of the PC for S/W operation.
• Access should only be made while the Moving part is not working.
• Do not access touch the moving parts during operation) and maintain a distance (1.5M) from the
product.
▷ Before Using the Equipment
Please make sure that all the components and cables are connected properly.
The device should be recognized by Device Manager.
Do not move the axis of scanner forcefully.
To Next Page
Loading...
