Medit T310 - Data Alignment Steps

59 Medit T-series User Guide
3.7 Data Alignment Steps
The data alignment steps, too, are based on the selected scan strategy.
The order of each sub-stage can be changed for the arch. The changed sequence is saved and can
be applied to the next scan.
In some cases the occlusion alignment might take a while. In that case, go to Settings -> Align
Occlusion Scan Automatically and turn it off. That way you can proceed to manual alignment straight
away.
Alignment Toolbox
Align
Automatically
Automatically aligns all the data displayed on the screen.
Detach
Detaches all the aligned data.
Remove
Alignment
Points
Deletes the alignment points.
Flip Occlusion
This option is only available in occlusion alignment.