8 Medit T-series User Guide
1.3 Scanner & Software
The scanner comes equipped with the accompanying software.
1) Scanner: Medit Table Top Scanner (T-series)
The scanner is designed to acquire scan data from a variety of dental models and impressions in
a convenient way. A full arch scan takes only 8 seconds.
2) Software: Medit Scan for Las
⚫ Medit Scan for Labs: The accompanying software is designed to be user friendly, making
it easy to acquire scanned data.
1.4 For the User
The system can only be used by trained dental professionals or technicians.
You are solely responsible for the accuracy and completion of all the data acquired using your 3D
scanner system. The user should verify the accuracy of each scan result and use it to evaluate the
applicability of each treatment.
The scanner system must be used in accordance with the accompanying user manual.
Improper use or handling of the scanner system will void your warranty. If you need additional
information or assistance in using the equipment, please contact your local service provider.
You cannot modify or change the device of the software system on your own.
1.5 Product Installation
All the components required to connect the scanner with your computer are included in the
package. This product is packaged carefully in order to avoid any damage and breakage during
To Next Page
Loading...
