Medit T310 - Scan Steps

45 Medit T-series User Guide
Scan Individual Stump-die: Scanning impression and prepared teeth.
Off
Select this option to scan the impression only.
On
Select this option to scan both impression and the prepared
teeth on the flexible multi-die.
▷ [Example] Individual Stump-die Scanning
3.6 Scan Steps
The sequence can be changed for each arch.
You can save the new sequence of steps and use for next scan.
Medit Scan for Labs provides two options for performing a scan with already existing data: 1) Re-
scan (‘Scan’ ) and 2) Add to the existing data (‘Add Another Scanbody’ , ‘Additional Scan’
Off
On