Medit T310 - Page 32

32 Medit T-series User Guide
Table Top Scanner
Calibration Period
(Days)
Configure the calibration period of the tabletop scanner.
Scan Path
Configure the scan route for the scanning process. Choosing the detailed
scan path will take more time, however will more likely minimize the need for
additional scanning.
Sleep Mode
Select the time after which the scanner will go in to Sleep Mode.
i500
Calibration Period
(Days)
Configure the calibration period for the i500 – choose any given period (1
day; 3 days; 7 days; 14 days or 30 days).
Scan Data
Post-Processing Type
Configure the post-processing type based on the case (orthodontic or
prosthetic): speed-based type will allow to reduce the waiting time, while
quality-based type might take a while longer. None of the types affect the
accuracy of the scan.
Data Display Quality
This option controls the display quality of the scan data, while not having any
effect on the final result or the scan data accuracy.
If the option is set to ‘High’, it may affect the overall scanning performance.
File Size – Base
Allows to adjust the file size of the data acquired at Base scan stages.
File Size – Prepared
Teeth
Allows to adjust the file size of the data acquired at Prepped Teeth scan
stages.
Export Occlusion Scan
Data
Select whether you want the occlusion data to be saved as a separate file.
Align Occlusion Scan
Automatically
Select whether you want the data acquired at the Occlusion stage be aligned
automatically or you would like to align it manually.
Align Prep. Scan Data
Automatically
Select whether you want the prepared teeth data to be aligned
automatically or you would like to align it manually.
Cover Empty Spaces
Using the Color of
Turn this option on if you’d like to fill in the empty spaces in scan data with
the color of the data located on its sides.