EasyManuals Logo

Megger EGIL User Manual

Megger EGIL
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
11. Inputs and outputs
Do not apply voltage to the outputs.
Do not exceed the specified input voltage limit on
any of the EGIL inputs.
Polarity on AUX 1&2 must be red to + and black to
-.
12. Lightning
For added protection for EGIL during a lightning
storm unplug it from the AC outlet and from all
cables connected to the inputs. This will prevent
damage to the EGIL due to lightning and power
supply surges.
Never touch the plug and power cord if it begins to
thunder. Touching them may result in electric shock
13. Cleaning
Unplug EGIL before cleaning
Do not use liquid cleaners or aerosol cleaners.
Use only a damp cloth for cleaning.
Stubborn stains may be removed with a cloth lightly
dampened with a mild detergent solution.
14. Damaged EGIL.
Do not use EGIL if the test leads appear damaged.
Do not continue using a damaged EGIL. Using a
damaged EGIL may result in fire or electric shock.
Do not touch a damaged LCD panel directly with
bare hands. The liquid crystal, which leaks from the
panel, is poisonous if it enters the eyes or mouth. If
any part of the skin or body comes in direct contact
with the panel, please wash thoroughly. If some
physical symptoms result, please consult your doctor.
15. Damage requiring service
Unplug EGIL from all connections and refer
servicing to qualified service personnel under the
following conditions:
- When any connector is damaged, including mains
plug.
- If liquid has been spilled into EGIL.
- If EGIL has been exposed to rain or moisture.
- If the EGIL does not operate normally (following the
operating instructions).
- If the EGIL has been dropped or damaged in any way.
- When EGIL exhibits a distinct change in performance.
This indicates a need for service.
If EGIL begins to emit smoke, smells like something
is burning or makes strange noise, disconnect all
power connections immediately and contact your
dealer for advice.
16. Servicing
Do not attempt to service EGIL yourself; opening
or removing covers can expose you to dangerous
voltage and other hazards.
Please refer all servicing to qualified service
personnel.
If you attempt to service EGIL yourself the warranty
is no longer valid.
17. Returning
If, for some reason, you need to return EGIL, please
use either the original transport box or one of
equivalent strength
8 EGIL ZP-BM01E BM0087OE
1 SAFETY

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Megger EGIL and is the answer not in the manual?

Megger EGIL Specifications

General IconGeneral
BrandMegger
ModelEGIL
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals