15
SVERKER 750/760
Programma Electric AB
ZP-CD01E R05A
3.10 Resistor set and
capacitor
The resistor set and capacitor can be used to change
the phase angle of the current and voltage.
Note! There is no capacitor on the Sverker
760. The phase-angle is set with the
knob at the AC voltage source.
3.9 Make/Break
contact
There is a make/break contact that is actuated when
Sverker 750 is set to the ON+TIME or OFF+TIME
state. It can be used, for example, to synchronize
other equipment or to change the voltage supplied to
the relay protection equipment at the start of a test
from non-faulty to faulty or vice versa.
To Next Page
Loading...
Need help?
General
