70
SVERKER 750/760
Programma Electric AB
ZP-CD01E R05A
9.5 Measurement
section
Timer
Time can be displayed in seconds or in mains-
frequency cycles.
Specifications for the time expressed in
seconds
egnaRnoituloseRycaruccA
s999.9-000sm1)%10.0+sm1(±
s99.99-00.01sm01)%10.0+sm01(±
s9.99999-0.001sm001)%10.0+sm001(±
Specifications for time expressed in mains-
frequency cycles
egnaRnoituloseRycaruccA
selcyc9.999-0.0selcyc1.0)%10.0+selcyc1.0(±
5999994-0001
zH05taselcyc
elcyc1)%10.0+elcyc1(±
4999995-0001
zH06t
aselcyc
elcyc1)%10.0+elcyc1(±
Ammeter
Switching between ranges can be carried out either
automatically or manually as desired.
The measured current can be displayed in amperes
or as a percentage of a presettable nominal value.
AC current is measured as true RMS.
DC current is measured as a mean value.
The external current measurement input is protected
by a 6 A miniature circuit breaker, and input resist-
ance Rin is 0.22 Ω.
The values specified below are for measurement
intervals (times) longer than 100 ms. The measure-
ment error is greater for shorter measurement
intervals.
Specifications for current in amperes
-tseT
tniop
egnaRnoituloseRfo%(ycaruccA
)Am+gnidaer
A01-0CAA2:CAA99.1-01.0
CAAm01
)Am01+%1(±
CAA02:CAA99.91-00.2
CAAm01
)Am02+%1(±
A04-0CAA8:CAA99.7-04.0
CAAm01
)Am01
+%1(±
CAA08:CAA99.97-00.8
CAAm01
)Am08+%1(±
A001-0CAA02:CAA99.91-00.1
CAAm01
)Am02+%1(±
CAA002:CAA99.99-00.02
CAA
m01
:CAA9.942-0.001
CAAm001
)Am002+%1(±
nretxECAA6.0:CAA995.0-000.0
CAAm1
)Am2+%1(±
CAA6:CAA999.5-006.0
CAAm1
)Am
02+%1(±
CDA6.0:CDA995.0-000.0
CDAm1
)Am2+%5.0(±
CDA6:CDA999.5-006.0
CDAm1
)Am02+%5.0(±
Specifications for current displayed as a
percentage of a presettable nominal value.
noituloseR
egatnecreP
noituloseR
eulavlanimoN
ycaruccA
%1:%999-000A1:A999-000%1
Voltmeter
Switching between ranges can be carried out either
automatically or manually as desired.
The measured voltage can be displayed in volts or
as a percentage of a presettable nominal value.
AC voltage is measured as a true RMS.
DC voltage is measured as a mean value.
The input is protected by a PTC resistor, and input
resistance Rin is 220 kΩ.
The values specified below are for measurement
intervals (times) longer than 100 ms. The measure-
ment error is greater for shorter measurement
intervals.
To Next Page
Loading...
