Megger Programma Sverker 760 - 10 Maintenance; Changing the Position of the Switch for Mains Frecuency (Sverker 760)

73
SVERKER 750/760
Programma Electric AB
ZP-CD01E R05A
10 Maintenance
10.1 Changing the
position of the switch
for mains frecuency
(Sverker 760)
1. Disconnect Sverker 760 from the mains.
2. Remove the 8 screws on the bottom of
Sverker 760.
3. Lift the hood about 5 cm (2 inches).
4. Set the switch to the right position, see
picture below.