Megmeet MV200 Series - Page 70

70
auxiliary) reference frequency source
9: Switching between auxiliary
reference frequency source and (main
+ auxiliary) reference frequency
source
P02.11
Proportion
adjustment
selection of
set
frequency
Frequency
proportion
adjustment
0: Disabled
1: Corresponds to P02.15
2: Corresponds to the current
frequency
1 0 × √ ○
P02.12
Proportion
adjustment
coefficient
of set
frequency
Proportion
adjustment
coefficient
0.0%~200.0%
0.1％ 100.0％
× √ ○
P02.13
Acceleratio
n time 1
Acceleration
time 1
0.0~3600.0
(Unit
adopts
that of
P11.01)
0.1
0.75~22
:6S
30~45:2
0S
Others:
30S
√ √ ○
P02.14
Deceleratio
n time 1
Deceleration
time 1
0.0~3600.0
(Unit
adopts
that of
P11.01)
0.1
0.75~22
:6S
30~45:2
0S
Others:
30S
√ √ ○
P02.15
Maximum
output
frequency
Maximum
output
frequency
MAX{50.00, upper limit frequency
P02.16}~ 3000.00Hz
0.01Hz 50.00 √ √ ×
P02.16
Upper limit
frequency
Upper limit
frequency
P02.17~P02.15 0.01Hz 50.00 √ √ ○
P02.17
Lower limit
frequency
Lower limit
frequency
0.00~P02.16 0.01Hz 0.00 √ √ ○
Group P03: Motor parameters
P03.00
Rated
power of
motor 1
Rated power 0.4~999.9KW 0.1 0 √ √ ×
P03.01
Rated
voltage of
motor 1
Rated
voltage
0~ rated voltage of drive (P98.04)
1 0 √ √ ×
P03.02
Rated
current of
motor 1
Rated
current
0.1~999.9A 0.1A
Depend
ing on
model
√ √ ×
P03.03
Rated
frequency
of motor 1
Rated
frequency
1.00~3000.0Hz 0.01Hz
Depend
ing on
model
√ √ ×
P03.04
Rated
rotating
Rated
rotating
0~60000rpm 1rpm
1440rp
m
√ √ ×