69
frequency control when stop
0: Maintained when stop
1: Reset when stop
Hundreds place of LED: Auxiliary
digital frequency saving control
0: Save when power down
1: Do not save when power down
Thousands place of LED: Auxiliary
digital frequency control when stop
0: Maintained when stop
1: Reset when stop
Note: The unit and tens places are
only applicable for P02.04=0, 1, 2
hundreds and thousands place are
only applicable for P02.07=1, 2, 3
P02.07
Auxiliary
reference
frequency
source
selection
Auxiliary
frequency
source
selection
0: No auxiliary reference
1: Digital reference 1: Keyboard ∧∨
reference
2: Digital reference 2: Terminal UP/DN
reference
3: Serial port communication reference
4: AI analog reference
5: Terminal PULSE reference
6: Process closed loop PID
7: Bus reference
1 0 × √ ○
P02.08
Digital
setting of
auxiliary
reference
Digital
auxiliary
reference
0.00~3000.0Hz 0.01Hz 0.00 × √ ○
P02.09
Auxiliary
reference
coefficient
Auxiliary
reference
coefficient
0.00~9.99
Only enabled for P02.07=4~7
0.01 1.00 × √ ○
P02.10
Calculation
of reference
frequency
source
Main/auxiliar
y reference
calculation
0:+
1:-
2:*
3: MAX (main reference, auxiliary
reference)
4: MIN (main reference, auxiliary
reference)
5: sqrt (main reference) + sqrt
(auxiliary reference)
6: sqrt (main reference + auxiliary
reference)
7: Switching between main and
auxiliary reference frequency source
8: Switching between main reference
frequency source and (main +
1 0 × √ ○
To Next Page
Loading...