Megmeet MV200 Series - Page 74

74
braking
2:Start after speed tracking (including
the judgment of direction)
P08.01
Startup
delay time
Startup delay
time
0.00~30.00s 0.01s 0.00s × √ ○
P08.02
Startup
(dwell)
frequency
Startup
frequency
0.00~60.00Hz 0.01Hz 0.00Hz × √ ○
P08.03
Startup
frequency
retention
time
Startup
frequency
retention
time
0.00~10.00s 0.01s 0.00s × √ ○
P08.04
Startup DC
braking
current
Startup DC
braking
current
G: 0.0% ~ 100.0% of the rated current
of the drive
P: 0.0% ~ 50.0% of the rated current of
the drive
0.1%
0.0％
× √ ○
P08.05
Startup DC
braking
time
Startup DC
braking time
0.00 (Disabled)
0.01~30.00s
0.01s 0.00s × √ ○
P08.06 Stop mode Stop mode
0: Decelerate to stop
1: Coast to stop
2:Decelerate to stop + DC braking
1 0 × √ ×
P08.07
Stop
frequency
detection
Stop
frequency
detection
0.00~150.00Hz 0.01Hz 0.50Hz × √ ×
P08.08
Stop
frequency
detection
retention
time
Stop
frequency
detection
retention
time
0.00~10.00s 0.01s 0.00s × √ ○
P08.09~
P08.11
Reserved
P08.12
Initial
frequency
for stop DC
braking
Initial
frequency for
stop braking
0.00~60.00Hz 0.01Hz 0.00Hz × √ ○
P08.13
Waiting
time for
stop DC
braking
Waiting time
for stop
braking
0.00~10.00s 0.01s 0.00s × √ ○
P08.14
Stop DC
braking
current
Stop DC
braking
current
G: 0.0% ~ 100.0% of the rated current
of the drive
P: 0.0% ~ 50.0% of the rated current of
the drive
0.1% 0.0% × √ ○
P08.15
Stop DC
braking
time
Stop DC
braking time
0.0 (Disabled)
0.01~30.00s
0.01s 0.00s × √ ○
P08.16
Selecting
restart
Restart upon
power fault
0: Disabled
1: Enabled
1 0 × √ ×