EasyManua.ls Logo

Megmeet MV200 Series - Page 87

Default Icon
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
87
P12.05
Current
loop
proportional
gain ACR-P
Current loop
proportional
gain
1~5000 1 1000 ×
P12.06
Current
loop
integral
time ACR-I
Current loop
integral time
0.5~100.0ms 0.1 8.0 ×
P12.07
Anti-trip
function
enabling
Anti-trip
function
enabling
0: Disable
1: Enable
1 0 × ×
P12.08
Frequency
reduction
rate upon
voltage
compensati
on
Frequency
reduction
rate
0.00~99.99Hz/s 0.01 10.00 ×
P12.09
Pre-magnet
izing time
Pre-magneti
zing time
0.0~10.0s 0.1 0.0 × ×
P12.10
Minimum
flux
reference
value
Minimum
flux
reference
value
10~150% 1 10
×
P12.11
Flux-weake
ning
adjustment
coefficient 1
Flux-weaken
ing
adjustment
coefficient 1
0~10000 1 1000 ×
P12.12
Flux-weake
ning
adjustment
coefficient 2
Flux-weaken
ing
adjustment
coefficient 2
0~10000 1 1000 ×
P12.13
Flux-weake
ning control
mode
Flux-weaken
ing control
mode
0: Disable
1: Enable
1 1 ×
P12.14
Cooling fan
control
Fan control
0: Operate automatically
1: Fan operates continually during
power-up
2: Fan operates based on command
Note: It will keep running for 3 minutes
after power-off
1 2 × ×
P12.15
~P12.27
Reserved Reserved
Group P13: Multi-stage reference and simple PLC parameters
P13.00
Multi-stage
reference
property
setting
Multi-stage
reference
property
0: Multi-stage frequency reference
1: Multi-stage closed loop reference
1 0 ×
P13.01
Multi-stage
reference 1
Multi-stage
reference 1
When it is multi-stage frequency:
0.1% 10.0% ×

Table of Contents

Related product manuals