10 Settings
54
3. To start formatting, press the OK button. Confirm
the security query with YES. You can remove the
CF card as soon as formatting has been completed.
Additional drying
Selecting additional drying extends the drying time of conventional drying by 50%. Activating intelligent
drying restricts the criteria for ending the drying phase.
Activating/deactivating additional drying for all program runs
1. Select MenuSettings >Additional drying.
The display switches to the settings window.
2. Press pushbutton YES or NO to choose whether
additional drying should be performed during all
subsequent program runs.
3. Confirm with SAVE.
Activating/deactivating additional drying for the current program run
You can activate or deactivate additional drying exclusively for the current program during the program run
and into the sterilization phase. The settings during the program run are not carried over for the subse-
quent program runs.
1. Select the desired program.
2. Press START.
3. Select MenuSettings. The display switches to
the following window.
4. Place or remove the checkmark against
optionAdditional drying and confirm with
SAVE.
Intelligent drying
In contrast to a conventional time-controlled drying procedure, with which the duration of the drying phase
is determined by the program, the duration of the intelligent drying is automatically calculated using the re-
sidual moisture in the sterilization chamber. A number of factors play a role in this process including e.g.
the nature of the load, wrapped or unwrapped, the load quantity, the distribution of the load in the steriliza-
tion chamber etc. Comply with the specifications in section Loading the steam sterilizer [}page22].
To Next Page
Loading...
