MELAG Vacuklav 41 B+ Evolution - Maintenance; Servicing Intervals; Cleaning; Door Seal, Chamber, Mounts, Trays

11 Maintenance
63
11 Maintenance
Servicing intervals
Interval Measure Device components
Daily Check for soiling, deposits or
damage
Chamber inc. door seal and chamber
sealing face, door lock, mount for the load
With every filling of the
storage tank
Check the storage tank for
soiling and clean it if necessary
before filling
Internal storage tank
Every 2 weeks Clean the left-hand chamber of
the storage tank (waste water)
Internal storage tank
After 2 months Oil the door spindle Door mechanism
After 24 month
or2000cycles
Maintenance By the authorized customer services
working in accordance with the
maintenance instructions.
As required Cleaning the surfaces Housing parts
Cleaning
NOTICE
Inappropriately performed cleaning can lead to the scratching of and damage to surfaces
and the development of leaks in sealing surfaces.
This also favours the development of soiling deposits and corrosion in the sterilization
chamber.
n Comply with all information regarding cleaning of the part affected.
Door seal, chamber, chamber sealing face, mount, trays
Check the chamber, chamber sealing face, the door seal and the mount for the load weekly for soiling, de-
posits or damage.
If you find any impurities, remove the trays, cassettes and mount from the chamber from the front. Clean
the soiled components and the chamber.
When cleaning the chamber, load mount and chamber seal face and door seal, please comply with the
following:
u Switch off the steam sterilizer before cleaning and remove the power plug from the socket.
u Ensure that the chamber is not hot.
u Use a soft, non-fuzzing cloth.
u First soak the cloth in the cleaning alcohol or spirit and attempt to wipe away impurities.
u Use a chlorine and vinegar-free cleaning fluid.
u Only if the chamber, mount or chamber sealing face has persistent soiling should you use a mild, non-
scouring, stainless steel cleaning agent, with a pH value between 5 and 8.
u Use a neutral liquid cleaning agent to clean the door seal.
u You should not allow cleaning fluid to enter the piping coming from the chamber.
u Do not use any hard objects such as a metal saucepan cleaner or a steel brush.
Replace a worn, porous or cracked door seal immediately:
1. Remove the door seal from the groove in the round blank.