10 Settings
55
Intelligent drying is activated in the delivery state. Should you wish to deactivate intelligent drying, proceed
as follows:
1. Select theSettings >Device settings
>Intelligent drying. The display switches to
the corresponding window.
2. If you wish to deactivate intelligent drying, select NO.
3. Confirm with SAVE.
Water supply
Select the corresponding setting in the display, depending on whether the feed water supply is effected
using the internal storage tank or a water treatment unit:
1. Select theSettings menu.
2. Navigate toDevice settings >Water
supply.
Ê The display switches to theWater supply
window.
3. Select INTERNAL, if the supply is to be performed via
the internal storage tank or EXTERNAL, if you have
connected a water treatment unit. NOTICE!When
connecting an external feed water supply it is
necessary to connect an external wastewater
outflow as well. There is a risk that hot wastewater
might run through the emergency overflow.
4. Confirm with SAVE.
To Next Page
Loading...
