2 Safety
7
Program abort
n Please observe that depending on the time of the program abort, opening the door following a pro-
gram abort can lead to hot steam leaving the chamber.
n Depending on the time of the program abort, it is possible that the load is unsterile. Observe the clear
instructions shown on the display of the steam sterilizer. If necessary, sterilize the affected objects
after rewrapping.
Removing the sterilized equipment
n Never use force to open the door.
n Use a tray jack to remove the tray. Never touch the sterilized items, the chamber or the door with un-
protected hands. The components are hot.
n Check the packaging on the sterilized equipment for damage when removing it from the steam steriliz-
er. Should the packaging be damaged, re-pack the sterilization material and re-sterilize it.
Transport and storage
n Store and transport the device in a frost-free environment.
n The device should always be carried by two people.
n Use suitable carrying straps to carry the device.
Maintenance
n Maintenance should only be performed by authorized technicians.
n Maintain the specified servicing intervals.
n Only original MELAG spare parts may be used.
Malfunctions
n Should the device issue the same malfunction message repeatedly, turn off the device and if neces-
sary, inform your stockist.
n The device may only be serviced by authorized technicians.
Notification requirement in the event of serious accidents in the European Economic Area
n Please note that all serious accidents which occur in connection with the medical product (e.g. death
or serious deterioration in the state of health of a patient) which were presumably caused by the prod-
uct, must be reported to the manufacturer (MELAG) and the relevant authority of the member state, in
which the user and/or patient resides.
To Next Page
Loading...
