5 Operation
Initial commissioning is carried out by customer service. If
you want to put the machine back into operation following
a standstill, clean the machine as described (see chapter8
on page33).
5�1 Chip keys
Included with the machine are two green user chip keys
and one yellow manager chip key.
5�1�1 Green user chip key
The green user chip keys can be used to carry out the
following actions:
• Switching on/off the machine.
• Changing the filling levels.
• Carrying out a full cleaning of the machine.
• Cleaning the touch screen.
• Rinsing the mixer unit.
• Viewing and editing the weekly planner.
5�1�2 Yellow manager chip key
The yellow manager chip key provides the same options
as the user chip key. The following additional actions can
be carried out:
• Making settings on the machine.
• Editing the dispensing products.
• Creating/editing product groups.
• Displaying consumption and product statistics.
5�1�3 Without chip key
Waiter operation
Without a chip key, the following options are available in
waiter operation:
• Dispensing preset products.
• Emitting steam.
• Switching on/off the machine.
• Changing the filling levels.
• Carrying out a full cleaning of the machine.
• Cleaning the touch screen.
• Rinsing the mixer unit.
• Viewing and editing the weekly planner.
Self-service operation
Without a chip key, you can only dispense preset products
in self-service operation.
5�1�4 Logging in with a chip key
Fig. 3: Logging in with a chip key
1. Hold one of the chip keys on the contact surface(1)
at the front of the machine so that the inner and outer
contact surfaces are fully connected to one another
by the chip key.
9 You are logged in and can use the corresponding
functions.
5�2 LED status indication
An LED(2) (see Fig. 3) next to the chip key contact surface
shows the current status of the machine:
LED State
Off Machine is switched off and can be
switched on with the main switch
(see chapter5.3.1 on page11).
White flashing Machine switches on.
White
permanently
Machine is ready for dispensing.
Red Machine is in stand-by operation.
To switch on see chapter5.3.2 on
page11.
Blue flashing or
permanently
Malfunction: Switch off the
machine with the main switch and
switch it on again. If this occurs
repeatedly, contact customer
service.
10
39663 • 20220101
Operation
5