Melitta Cafina XT5 - Cleaning the Instant Container; Cleaning the Touch Screen

8�11 Cleaning the instant container
Fig. 55: Opening the instant container cover
1. Open the machine door using the key(2).
2. Lift the instant container cover(1) upwards carefully.
There will be one or two instant containers depending on
the equipment.
000147
1
2
Fig. 56: Instant container
3. Turn the powder chute(2) upwards so that no powder
can fall out.
4. Remove the instant container(1).
5. Empty the instant container.
6. Clean all parts thoroughly with hot water and a
detergent.
͵ Dishwasher cleaning is possible at max. 60°C.
7. Dry the parts completely.
͵ To prevent the instant powder from forming
clumps, the parts must be absolutely dry.
8. If you want to continue using the machine, refill the
instant powder as described in chapter 5.4.2 on
page14.
9 The instant container has been cleaned.
8�12 Cleaning the touch screen
Cleaning is required if there is any visible dirt.
1. On the display, press the menu symbol “≡”(1) (see Fig.
44) and then “Cleaning”.
͵ In self-service operation, you must first log in with
a user chip key (see chapter5.1.4 on page10).
2. Press the “Clean touch screen” button.
͵ The display is now blocked for inputs.
3. Clean the screen with a microfiber cloth or a damp
cloth.
͵ If you use a damp cloth, make sure that the touch
screen is completely dry and free of streaks before
you continue using the unit.
4. After cleaning, enable the display for inputs again by
touching the numbers 1-4 in the corners of the display.
000304
Fig. 57: Cleaning the touch screen
9 The cleaning of the touch screen is complete.
40
39663 • 20220101
Cleaning
8