Menzi Muck A91 - 7.8 Operating Attachments

Page 140 www.menzimuck.com
Working with the machine
7.8 Operating the accessories
The instructions listed here should be understood as additional information to the operating instructions of the
respective attachment. The instructions describe only those functions required for the MENZI MUCK attachments.
Further instructions are contained in the operating instructions of the attachment. Before using the machine for the
rst time, the operator must familiarise himself with its equipment to enable reliable, economical and above all safe
use of the extensive range of machine functions.
7.8.1 Attaching buckets
1. Set bucket down on at surface.
2. Remove locking pins (A).
3. Rotate the bucket to relieve the pin (B).
4. Remove the pin (B).
5. Lower the bucket onto the oor.
6. Move the boom to relieve pin the (C).
7. Remove the pin (C).
Fit the bucket in the reverse sequence.
A
B
C
Warning !
Nonobservance of the attachment operating instructions
• Can result in death or severe injuries.
• Please refer to the attachment operating instructions and ob-
serve the regulations.
Attention !
Incorrect coupling of attachments
• Can result in damage to property.
• Make sure that the attachments are locked correctly and the
quick couplers are connected correctly.