Page 84 www.menzimuck.com
Control and Display elements
6.7.4 Open and close doors
Opening from the outside:
Open the door locks by turning the ignition key. Then actuate the
lock and open the door. You can lock the door in place after ope-
ning by 180°.
Opening from the inside:
Press the actuating level downwards and open the doors.
Close: Turn the locking switch anticlockwise to release the doors
from their fasteners. Then close the doors.
You can lock the doors with the ignition key.
Attention !
Door not locked in place
• Can result in damage to property.
• Check whether the door is correctly locked in place either in
open or closed position.
To Next Page
Loading...
