OPERATION
97
• When shifting, always stop at neutral position and allow the
engine speed to return to idle.
• Panel mount remote control requires the operator to always
press shift lock while moving the control handle out of the
neutral position.
3428
• Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed
is at idle. Do not shift outboard into forward or reverse when the
engine is not running.
• The outboard has three gear shift positions to provide
operation. Forward (F), Neutral (N) and Reverse (R).
F
N
R
3417
• When shifting, always stop at neutral position and allow the
engine speed to return to idle.
• Advance the control lever to further increase speed.
To Next Page
Loading...
