Mercury 200 VERADO User Manual

FEATURES AND CONTROLS
70
5. Neutral LEDs - The neutral LEDs illuminate when engines are
in neutral gear position. The lights will flash when in throttle
only mode.
NOTE: Gear position is determined by sensing the position of the
shift actuator on the engine, not the position of the control handle.
6. Active LED - The active LED illuminates to show the remote
control is active and ready for use.
7. Sync LED - The "SYNC" LED illuminates when the RPM of the
engines are being synchronized by the DTS system.
ACTIVE
SYNC
THROTTLE
ONLY
STATION SELECT
a
b
c
d
e
f
NEUTRAL
SELECT
13854
a - Neutral LEDS
b - Select button
c - Arrow trackpad
d - Sync LED
e - Throttle only/station
select button
f - Active LED
SYNCHRONIZING ENGINES
The auto synchronizing feature, when engaged, will automatically
adjust all engine speeds to match the speed of the starboard
engine.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat