Section 5 - Maintenance
Page 96 90-8M0069751 eng APRIL 2012
Tube Ref No. Description Where Used Part No.
91
Engine Coupler Spline
Grease
Driveshaft splines and U-joint O-rings 92-802869A 1
2.
For propeller shaft lubrication, See Propellers.
3. Inspect the U‑joint bellows for cracks or other signs of deterioration. Ensure that the bellows clamps are tight.
4. Rotate the bell housing in the upward and side‑to‑side directions to inspect the exhaust bellows, shift cable bellows, and
clamps.
Alpha Sterndrive
a - U‑joint bellow
b - Exhaust bellow
c - Bell housing
d - Gimbal ring
e - Gimbal housing
f - Shift cable bellows
Bravo Sterndrive
a - U‑joint bellow
b - Exhaust tube
c - Bell housing
d - Gimbal ring
e - Gimbal housing
f - Shift cable bellows
a
f
b
c
d
e
19783
a
f
b
c
d
e
22189