Section 4 - Specifications
Page 38 90-8M0069751 eng APRIL 2012
Description Where Used Part Number
Shell Myrina
Engine crankcase Obtain Locally
Mopar
Texaco Ursa Super TD
Wintershall Multi‑Rekord
Veedol Turbostar
Wintershall VIiva 1
These oils are approved by Mercury Marine and Marine Power Europe. For all temperature operation use 15W40 oil.
Engine Specifications
Description
Specifications
QSD 2.0
Engine type In‑line 4‑cylinder diesel
Induction Type Turbocharged and aftercooled 16‑valve
Displacement 2.0 L (122 cid)
Firing order 1‑3‑4‑2
Bore 83 mm (3.26 in.)
Stroke 92 mm (3.62 in.)
Rated engine RPM (refer to Conditions Affecting Operation
—Propeller Selection for additional information)
Refer to the appropriate
Performance Curve and Data Sheet
(available at www.mercurymarine.com/engines/diesel/)
Idle RPM in neutral (engine at normal operating temperature) 700 RPM
Oil pressure at idle 2.4 bar [240 kPa] (35 psi)
Oil pressure at 4000 RPM 6.6 bar [660 kPa] (95 psi)
Thermostats (water) 83° C (181° F)
Thermostats (oil) 95° C (203° F)
Coolant temperature 80–85° C (176–185° F)
Electrical system 12‑volt negative (–) ground
Alternator rating 14V, 110 A
Recommended battery rating 750 CCA, 950 MCA, or 180 Ahm
Fluid Specifications
IMPORTANT: All capacities are approximate fluid measures.
Engine
IMPORTANT: Fluid level indicators are calibrated to provide accurate readings with the engine level and installed according to
manufacturer's instructions. Modifications may affect fluid level readings.
Always use the proper fluid level indicator to determine the exact quantity of oil or fluid required.
QSD 2.0
Engines with Closed‑Cooling System Oil Cooler
QSD 2.0 System Capacity Fluid Type Part Number
Engine oil (with filter) 5.85 L (6.20 US qt) 15W40 4‑cycle Diesel Engine Oil 92‑877695K1
Closed‑cooling system 7.80 L (8.25 US qt)
Marine Engine Coolant
(Only available in Europe)
92‑813054A2
Fleetguard Compleat with DCA4
Fleetguard Part Number: CC2825
Container size: 3.75 L (1.00 US gal)
Obtain locally