Section 5 - Maintenance
Page 78 90-8M0069751 eng APRIL 2012
a. Close the seacock, if equipped, or disconnect and plug the seawater inlet hose.
a - Seacock
b - Seawater inlet hose
c - Plug
b. Raise the sterndrive to trailer position.
c. Install the appropriate flushing attachment over the water inlet holes in the gear housing.
Flushing attachments for dual water pickup
Flushing attachments for side water pickup
a - Flushing device
b - Hose attachment
c - Dual water pickup flush gearcase seal kit
Flushing Device 91‑44357Q 2
Attaches to the water intakes; provides a fresh water connection when
flushing the cooling system or operating the engine.
a
b
c
13171
To Next Page
Loading...
Need help?
General