2. Ensure that all nodes in the network are completely
unobstructed from each other. No tree foliage, poles,
buildings, or other obstructions should come within a 6 m
(20 ft) corridor between nodes for an optimal connection.
iii. Height level
1. A node will have better range when installed at its highest
appropriate height.
2. It is best to have all nodes within a network installed at
similar and consistent heights.
3. The maximum height for a stable connection to the node
at ground level is about 20 m (65 ft).
iv. Solar coverage
1. If you are using solar energy as the node’s main source of
power, the panel must be oriented correctly based on the
location. If the panel is easily-accessible, efficiency can be
further increased by optimizing the orientation by season,
though that is not always necessary.
2. Ensure that there are no obstructions (including shadows)
preventing the sun from covering the panel throughout
the day. A partially-covered solar panel is unable to
produce power and must be fully unobstructed to
function properly.
To Next Page
Loading...