METER ZL6 - Page 52

47
ZL6
3. Enter the required information, including a valid email address.
4. Accept the terms and conditions.
5. Click Sign Up.
ZENTRA Cloud will send an email confirmation.
6. Click the link in the confirmation email inside email application.
7. Log in to ZENTRA Cloud.
To view data from ZL6 loggers on the customer site, subscribe to each desired ZL6 logger on
ZENTRA Cloud following the steps below. A logger can only belong to one site at a time.
NOTE: Depending on the organization, labels may be Farm and Field or Site and Plot. These designations can be
changed at any time.
1. Select New Farm on the ZENTRA Cloud home screen.
2. Give the Farm a name.
A Farm can contain one or more Fields.
3. Select New Field.
4. Associate this Field to the Farm.
5. Give the Field a name.
A Field can contain one or more loggers.
6. Select New Subscription.
7. Choose the Farm and Field.
8. Fill in the ZL6 Device Serial Number and Device Password as shown on the device
subscription card (Figure28).
Once subscribed to a ZL6, the logger should appear on the map and sensor data can be
viewed and downloaded. Logger settings can be changed using ZENTRA Cloud. ZENTRA
Cloud also provides a convenient way to share data from ZL6 loggers with colleagues, with
user-set permissions. See the online help files for more information.