Metos 40E - Page 27

|
27
VIKING / VIKING COMBI
Rev. 2.0 (1.8.2017)
Operating instructions
Using the different parts of the safety lid
The safety lid consists of the following parts: the solid lid, the safety grid for the lid opening
and the cover for the lid opening. All these parts can be washed in a dishwasher.
Solid lid
Cover for lid opening
Safety grid for lid opening
Taking the safety lid apart
1. Close the lid.
2. Remove the cover of the safety grid by raising it upwards.
3. Remove the safety grid by raising it fi rst to an upright position (open position) and then simultaneously
raising and pulling it towards yourself.
4. Remove the solid lid by pulling the interlock lock, at the same time holding the lid’s lifting handle with
the other hand.