|
37
VIKING / VIKING COMBI
Rev. 2.0 (1.8.2017)
Installation
1. Roller plunger
2. Tilting limit switch - cooking position
3. Tilting limit switch - extreme position
Electrically heated models
Steam heated models
6.7. Testing the kettle
Do the following measurements and checks before taking the kettle into use.
6.7.1. Filling the steam generator (electrically heated models)
Before the kettle is switched on, the steam generator must be fi lled with water.
Do the following:
• Check that the kettle is in its upright position.
1. Control valve of steam generator
• Open the control valve by turning the handle parallel to the valve.
To Next Page
Loading...
