Metos 40E - Mixer Operation (Viking Combi)

|
17
VIKING / VIKING COMBI
Rev. 2.0 (1.8.2017)
Operating instructions
The mixing tool is equipped with 1-4 scrapers, depending on the size of the tool.
Scraper 40 60 80 100 150 200 300 400
Scraper A2 -1121212
Scraper B2 (bottom) --111111
Scraper C2 (bottom) 11- -1122
4.2.4. Mixer operation (Viking Combi)
The mixer operates only when the safety lid and the safety grid of the lid opening are attached and
closed.
If the kettle lid is opened during mixing, the mixing function will be interrupted and it must be restarted
using the mixing program selector switch.
Positioning the mixing tool and scrapers
Attach the scrapers by placing the pins on the mixing tool into the holes on the scrapers. After that turn
the scraper into place by lifting the scraper’s lower part. Finally pull the scraper forward. The bevel (1) will
on the lower scraper point upwards and on the side scraper away from the mixer axle.
Scrapers are not needed when preparing large quantities of mashed potatoes or when kneading dough.
Use scrapers in all other cooking modes to increase the effi ciency of heat transfer and to help the clean-
ing of the kettle.