42
|
VIKING / VIKING COMBI
Rev. 2.0 (1.8.2017)
Installation
6.8.2. Checking the safety equipment
The mixer must stop when the safety grid or the lid itself is removed. When the lid and the safety grid
are replaced, the mixer can be restarted.
The mixer must stop immediately when the emergency/stop button is activated. The switch is released
by turning it clockwise until it jumps to its upper position. After this the mixer can be restarted.
6.9. Combination of machines
When the kettle is connected to a closed loop cooling system, a combination of machines as specifi ed in
the machinery directive is created for which, at commissioning, a signed declaration of conformity must
be provided covering the combination of machines.
Machine 1
Kettle
Machine 2
Cooling-
system
Start signal
Error signal
Cooling circuit to kettle
Cooling circuit return
COMBINATION OF MACHINES
To Next Page
Loading...
