MI 3309 BT DeltaPAT General description
10
1.4. Standards applied
The DeltaPAT is manufactured and tested in accordance with the following regulations:
Electromagnetic compatibility (EMC)
EN 61326 Electrical equipment for measurement, control and laboratory
use – EMC requirements
Class B (Hand-held equipment used in controlled EM environments)
Safety (LVD)
EN 61010-1 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 1: General requirements
EN 61010-2-030 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 2-030: Particular requirements for testing
and measuring circuits
EN 61010-031 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 031: Safety requirements for hand-held
probe assemblies for electrical measurement and test
EN 61010-2-032 Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-032: Particular requirements for
hand-held and hand-manipulated current sensors for electrical test
and measurement
Functionality
EN 61557 Electrical safety in low voltage distribution systems up to 1000 V
AC
and
1500 V
AC
– Equipment for testing, measuring or monitoring of
protective measures
Part 2 Insulation resistance
Part 4 Resistance of earth connection and equipotential bonding
VDE 0404-1 Testing and measuring equipment for checking the electric safety of
electric devices - Part 1: General requirements
VDE 0404-2 Testing and measuring equipment for checking the electric safety of
electric devices - Part 2: Testing equipment for tests after repair,
change or in the case of repeat tests
Other reference standards for testing portable appliances
VDE 0701-702 Inspection after repair, modification of electrical appliances – Periodic
inspection on electrical appliances
General requirements for electrical safety
NEN 3140 Guidelines for safe working practices
The IEE Code of Practice for In-service Inspection and Testing of
Electrical Equipment 3
rd
edition
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same
number (e.g. IEC 61010) and differ only in amended parts required by European
harmonization procedure.