MI 3309 BT DeltaPAT Instrument description
12
2.2. Connector panel
Figure 2.2: Connector panel
Legend:
1 S/EB Probe and Earth continuity terminal
2 IEC IEC test terminal
3 LN LN terminal (for connection of fixed installed appliances)
4 PE PE terminal (for connection of fixed installed appliances)
5 FUSE compartment
Fuses: 2 x T16 A / 250 V; breaking capacity: 1500 A
(for protection against overload and short circuit)
6 MAINS
Mains supply connector and test terminal.
(Used for charging, Voltage and (P)RCD tests also)
7 USB connector Communication with PC USB (1.1) port.
8 PS/2 connector
Communication with barcode scanner.
Communication with printer.
Communication with RFID reader/writer.
Communication with PC RS232 port.
Initialization of Bluetooth Dongle.
Warning:
Maximum allowed voltage on MAINS terminal is 300 V (CAT II)!