MI 3309 BT DeltaPAT General description
6
1. General description
The multifunctional portable appliance tester DeltaPAT is intended to perform
measurements for testing the electrical safety of portable electrical equipment.
The following tests can be performed:
visual inspection;
earth continuity resistance;
insulation resistance;
insulation resistance of isolated accessible conductive parts;
substitute leakage current;
substitute leakage current of isolated accessible conductive parts;
IEC cord polarity test;
differential leakage current test;
touch leakage test;
RCD and PRCD tests, also PRCD-K and PRCD-S;
power test;
TRMS voltage;
clamp current;
functional test.
Some instrument's highlights:
Power supply from both mains power and batteries;
graphic LCD with resolution of 128 x 64 dots, with backlight;
large data flash memory for storing test results and parameters (approx. 1500 tests
can be stored);
two communication ports (USB and RS232C) for communication with PC, barcode
scanner, printer and RFID reader/writer;
Bluetooth communication with PC, printers, and Android devices
additional connectors for fixed appliances testing;
built-in real time clock;
fully compatible with new METREL PATLink PRO PC software package;
Powerful functions for fast and efficient periodic testing are included:
pre-programmed test sequences;
fast testing with the help of barcodes and RFID tags;
custom test sequences can be uploaded from PC.
The graphic display with backlight offers easy reading of results, indications, measurement
parameters and messages. Two LED Pass/Fail indicators are placed at the sides of the
LCD.
The unit is very intuitive to use and has help menus describing how to perform each test.
The operator therefore does not need any special training (except reading this instruction
manual) to operate the instrument.
To Next Page
Loading...
Need help?
General
