2.1 Setting up the instruments
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4
￭￭￭￭￭￭￭￭
900 Touch Control
Balance
If you connect a balance to the 900 Touch Control, you can transfer the
sample size per push-button from the balance to the titrator.
800 Dosino
In case you would like to automatically add an auxiliary solution to the
sample before the titration, you will also need a Dosino. Connect it to the
connector MSB 2 on the Titrando.
Samples and sample vessels
You can use sample beakers of any size. Use an acid or base as sample,
which can be titrated with the selected titrant.
Please note that the stirrer has to be connected to the connector MSB 1
of the Titrando for the following example methods. If you use a Titrando
without internal dosing drive, then you must connect the external dosing
device (here: Dosino) to the MSB connector of the stirrer. This way it will
be controlled like an internal dosing drive of the Titrando, i.e. as dosing
device 1.
To Next Page
Loading...
