￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
900 Touch Control
￭￭￭￭￭￭￭￭
1
1 Introduction
The present tutorial helps you to get acquainted with the operation of the
900 Touch Control. You will be guided step by step through the most
important dialog pages by using a simple pH titration as an example.
Thereby you will learn how to efficiently operate and use the 900 Touch
Control.
1.1 Structure of the tutorial
￭ Setup
Preparing the titration system.
￭ Basics – simple acid-base titration
Loading and carrying out methods, displaying results.
￭ Additional functions – creating methods, statistics etc.
Optimizing titration parameters, calculating statistics, efficiently using
the sample table.
￭ User administration
User list, login with USB flash drive or password.
Detailed information on the functioning and operation of the Titrando sys-
tem can be found in the online help and the corresponding manuals:
￭ Manual for the Titrando
￭ Manual for the 900 Touch Control
￭ Manual for the exchange unit
￭ Manual for the 800 Dosino or the dosing unit
1.2 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item
[Next] Button or key
To Next Page
Loading...
