16 3 R 74 en
8TOOLS
In addition to standard tools the following special tools
might be needed to facilitate working.
For removal of the actautor
For mounting and removal of the seat.
Shaft position checking (low Cv valves)
- former H069563 (Series RA)
- former H069564 (Series RE, RE1)
These are available from the manufacturer.
9 ORDERING SPARE PARTS
When ordering spare parts, always include the following
information:
type code, sales order number, serial number
(stamped on a valve body)
number of the parts list, part number, name of the
part and quantity required
This information can be found from the identification plate
or documents.
Product: ID:
B1C/B1J 6 303821
B1C 8-11 / B1J 8-10 8546-1
B1C 12-17 / B1J 12-16 8546-2
B1C/B1J 20 8546-3
B1C/B1J 25 8546-4
B1C/B1J 32 8546-5
B1C 40 / B1J 322 8546-6
B1C 50 8546-7
B1C 502 8546-8
Product: ID:
DN 01 273336
DN 015 273337
DN 02 273338
DN 03 273339
DN 04 273340
DN 06 273341
DN 08 273342
DN 10 273343
DN 12 273344
NOTE:
Always use original spare parts to make sure that the valve
functions as intended.
To Next Page
Loading...
Need help?
General
