Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx Page 2 of 52
Preface
Dear Customer,
Congratulations and thank you for choosing the MHM Synchroprint 5000. This machine is
designed to provide the highest standards of performance and reliability throughout its normal
operating life. Highly innovative and precise MHM technology provides a combination of the finest
build quality along with optimal safety. We trust these Operating Instructions will assist you in
becoming familiar with the safe and efficient operation of the Synchroprint 5000.
Important note:
Due to our policy of continuous improvement we reserve the right to change specifications without
prior notice. Therefore certain individual fittings and components may differ slightly from the
model detailed in this document. For any further questions regarding your Synchroprint 5000,
please contact the MHM service team.
Wishing you every success with your future production…
Machines Highest Mechatronic GmbH
Important advice regarding these Operating Instructions
These Operating Instructions form an integral part of the Synchroprint 5000 and must be made
available to all authorized personnel at all times. No particular sections or pages should be removed
from these Operating Instructions, and any missing sections or pages should be replaced
immediately, particularly in relation to section “1. Safety Instructions”.
These Operating Instructions are subject to international copyright and may not be reproduced
and/or revised without our prior written approval.
©2005-2016 Machines Highest Mechatronic GmbH, Erl, Austria. (All rights reserved).
Published by: Machines Highest Mechatronic GmbH
Muehlgraben 43a
A-6343 Erl / AUSTRIA
Contact details: Telephone:+43 (0) 5373 – 76080-18
Fax: +43 (0) 5373 – 76080-20
Mobile: +43 (0) 664 – 8151380
E-mail: service@mhm.at
Erl, January 2016
To Next Page
Loading...