Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx Page 31 of 52
9.2. Stopping the Machine in the event of Malfunction
If the main control system detects any electrical or mechanical malfunction, the main drive will be
disabled/de-activated automatically for the safety and protection of the operating staff.
9.3. Putting the Machine into Operation
The machine is connected to the supply voltage by means of the machine’s master switch. The
machine control is started up with the “main control switch”, a process that takes approximately 3
seconds. Subsequently, the turntable with the pallets must be moved to its reference position
(initialization).
The following points must be observed:
Prior to each start-up, any possible defects of the Synchroprint must be rectified by
authorized staff.
The start-up of the machine must only be carried out by qualified and trained personnel
knowing and observing all safety instructions.
It must absolutely be ensured that only authorized persons are permitted in the work area of
the machine, and that starting the machine will not endanger anybody.
The functioning of all safety facilities/devices must be checked.
All tools and foreign parts must be removed from the machine prior to its start-up.
The operators must be aware of the function and position of all safety devices/facilities.
9.4. Configuration of the Control
The Synchroprint is equipped with the MHM Hybrid-Control system. This allows controlling the
machine with the terminal unit when tablet “m-touch pro” is defective. At the print stations keypads
with separate displays are located. Every table is equipped with an individual drive unit.
9.5. Hybrid-Control
Hybrid-Control enables machine controlling either with the tablet “m-touch pro” or with the
terminal. The communication between the different components is established by connected cables
or Bluetooth. To change to operation by terminal disconnect the tablet and close the application
with the button “Close Application” in “BasicSetup”. Alternatively the tablet can be switched off
completely or be transported outside of the Bluetooth transmission range.
To Next Page
Loading...