Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx Page 5 of 52
1. Safety Instructions
This section describes the safety instructions for the correct and safe operation of the Synchroprint
5000. In addition, this section also contains references to the European rules and regulations
concerning the guarantee of industrial safety along with safety at the workplace. These rules and
regulations provide the basis for these operating instructions.
These Operating Instructions include:
1. General safety instructions.
2. Special safety instructions, if they are relevant to a specific section, at the beginning of that
respective section.
3. Special safety instructions, if they are important for detailed sequences of operation, before
the description of that respective sequence of operation.
4. Indications to read such instructions included in the respective section.
1.1. Description of Key Words and Symbols in the Operating Instructions
In these operating instructions classified key words and symbols are used to identify dangers and
items that require special attention. Particular attention is to be paid to the sections marked in this
manner, because they contribute to personal safety as well as the prevention of damage to the
Synchroprint.
This symbol indicates possible risk to life.
This symbol indicates danger of damage to
property and/or environment.
This symbol indicates useful additional information
and operating suggestions.
To Next Page
Loading...
