Microair Avionics M760 Transceiver Installation & User Manual
M760Q Install & User Manual 01R12.doc Page 4 of 36 30
th
March 2010
1.0 INTRODUCTION
Thank you for purchasing this Microair product. The M760 is a 760 channel VHF aircraft transceiver, packaged
to fit a standard 57mm (2 ¼”) instrument hole. The M760 has been produced in accordance with CASA APMA
approval E2000-004.
2.0 UNPACKING
The M760 is boxed in polystyrene for physical protection, and wrapped in an anti-static bag for electrical
protection. Once the box is opened and the radio unwrapped, the owner is responsible for physical and
electrical protection.
Enclosed with the radio are: User / Install Manual
CASA form 1 – release certificate
DB15 solder plug and backshell
2.1 USER / INSTALL MANUAL
Please read this manual completely before attempting to install or operate this radio. There are several
installation options you may wish to consider, which are clearly laid out in the installation section.
IMPORTANT NOTE
This manual may be used as technical data to support an installation
under the FAA form 337 process.
The M760 has all of the basic radio operations, and many other management and programming options,
which are described in the operation and memory sections of this manual.
Please refer to the Microair Avionics Website www.microair.com.au
for more installation information.
2.2 NAMEPLATE DETAILS
The M760 has a nameplate fixed to the
bottom plate of the chassis.
The Nameplate records the M760’s part
number, revision, and serial number.
Microair recommends the M760 serial
number be noted in the aircraft’s
maintenance records for future reference.
2.3 AUTHORISED RELEASE CERTIFICATE
The CASA form 1 – release note is an internationally recognised document which clearly identifies the
part/component the form 1 is associated with. Please keep this certificate with the aircraft’s file or log
book.
To Next Page
Loading...
