© Microhard Systems Inc. CONFIDENTIAL 57
IP9xx Series
6.0 Configuration
6.1.4.2 NTP Server Configuration
The Network Time Protocol (NTP) feature may be ENABLED,
provided there is an NTP server available and its IP address or
‘name‘ is entered in the appropriate field.
NTP may be used to
synchronize the time in the IP
Series within a network to a
reference time source.
Image 6G: Network Configuration, NTP Server Config. Submenu
NTP Server Status
Note that if NTP Server Status is ENABLED, the ‗Synchronize with
NTP Server‘ soft button on the System Configuration menu will be
available for use.
Leave as DISABLED (default) if a server is not available.
Disable
Disable
Enable
Values
To Next Page
Loading...
