16 IP920 Operating Manual: Chapter 4 Configuration
4. Configuration
4.0 Overview
A similar menu hierarchy applies to all three user interfaces. The following
description is based on mainly webUI. Each function should be the same
among the three approaches unless stated otherwise.
4.1 Main Menu
The following main menu is the root menu which navigates to the
submenus or to the system parameters.
⌦ System Configuration
⌦ Network Configuration
⌦ Radio Configuration
⌦ COM1 Configuration
⌦ COM2 Configuration
⌦ Security Configuration
⌦ System Information
⌦ System Tools
4.2 System Configuration
System configuration gives the ability to setup system time statically or
allow IP920 to synchronize time with a NTP server. There is no backup
battery to support system clock. The system clock starts from default time
upon system reboot, including power on reboot or software reboot. Re-
configuration is needed upon reboot if correct system clock is desired.
Figure 5 System Configuration
Radio Description: A simple text description can be placed here to
describe a unit. Up to 30 characters are allowed for this description. The
description will be part of the result of discovery program.
To Next Page
Loading...
Need help?
General