Microhard Systems IP920 - Page 33

IP920 Operating Manual: Chapter 4 Configuration 23
V3 Authentication Password: SNMPv3 user's authentication password.
This is only valid when V3 User Authentication Level is set to AuthNoPriv
or AuthPriv.
V3 Privacy Password: SNMPv3 user's encryption password. This is only
valid when V3 User Authentication Level is set to AuthPriv.
SNMP Trap Version: Select which version of trap will be sent in case
failure or alarm.
Auth Failure Traps: If select "Enable", an authentication failure trap will
be generated upon authentication failure.
Trap Community Name: The community name can receive traps.
Trap Manage Host IP: Defines a host IP address where traps will be sent
to.