1 About the MICSASII
SAFETY PRECAUTIONS
SAMPLES
The instrument was designed for nonhazardous samples only. DONOT attempt to use the
instrument to analyze any sample material whose safety has not been verified. During normal
operation, fine particles may become airborne or skin contact may occur with the sample.
POWER SUPPLY
Use of a power cord or power supply not provided with the instrument could cause
personal injury or damage to the equipment. Do not use a power cord or power supply
other than what was supplied with the instrument. If a replacement is needed, contact
your Micromeritics Service Representative.
1 - 4
MIC SAS II 5800 Operator Manual
580-42800-01 (Rev - ) — June 2019