Micromeritics MIC SAS II 5800 - Page 42

6 Maintenance Menu Selection
Field or Button
Description
Show fisher [checkbox]
Indicates if Fisher sizes and areas should be displayed and reported.
Show logo [checkbox]
Enable to display a logo on reports. This feature requires the upload of
a PNGor BMP image. If this option is enabled, the image is displayed
and printed to the right of the report title for all reports. To upload a
logo, tap Advanced on the Maintenance window.
Software version **
Version of the installed software application.
Surface area unit
[button]
Select whether surface areas are expressed as cm
2
/g or m
2
/g.
Timezone
[drop-downbox]
Select the local timezone. When the timezone is changed, the times
displayed for records are changed to local times for the new timezone.
Maintenance (continued)
* Applicable to Static networks only.
** Field cannot be edited.
*** Field can be edited on the Advanced view only.
6 - 4
MIC SAS II 5800 Operator Manual
580-42800-01 (Rev - ) — June 2019