MicroNet SP676C User Manual

Description:
Set or show the VLAN user priority mapping.
[<portlist>] : Port list (default: All ports).
[<tagpriolist>]: VLAN user priority list, 0-7 (default: All user priorities).
[<class>] : Internal class of service (default: Show class).
QoS DiffServ [<dscpno>] [<class>]
Description:
Set or show the IP Differentiated Services mapping.
[<dscpno>]: IP DSCP number, 0-63 (default: All DSCP values).
[<class>] : Internal class of service (default: Show class).
QoS Userprio [<portlist>] [<tagprio>]
Description:
Set or show the default VLAN user priority for received untagged frames.
[<portlist>]: Port list (default: All ports).
[<tagprio>] : VLAN tag user priority, 0-7 (default: Show user priority).
QoS Shaper [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the shaper configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable] : Enable or disable shaper.
[<rate>] : Disable or set leaky bucket rate in Kbit/s
[0k,128k,256k,384k,512k,640k,768k,896k,1024k,1152k,1280k
1408k,1536k,1664k,1792k,1920k,2048k,2176k,2304k,2432k
2560k,2688k,2816k,2944k,3072k,3200k,3328k,3456k,3584k
3712k,3840k,3968k]
(default: Show shaper rate 0k is disable).
QoS Policer [<portlist>] [disable | <rate>]
Description:
Set or show the policer configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable] : Enable or disable policer.
[<rate>] : Disable or set leaky bucket rate in Kbit/s
[0k,128k,256k,384k,512k,640k,768k,896k,1024k,1152k,1280k
1408k,1536k,1664k,1792k,1920k,2048k,2176k,2304k,2432k
www.micronet.com.tw
Page 66 of 74

MicroNet SP676C Specifications

General

Brand	MicroNet
Model	SP676C
Category	Switch
Language	English