Page 74 of 74
IGMP Router ports [<portlist>] [enable|disable]
Description:
Set or show IGMP administrative router ports.
(default: Show current router ports)
IGMP Unregistered Flood [enable|disable]
Description:
Set or show forwarding mode for unregistered (not-joined) IP multicast
traffic. Will flood when enabled, and forward to router-ports only when disabled
(default: Show current mode)
Debug Commands
Commands at Debug level:
Debug Read Register <block> <
subblock> <address>
Debug Read Register <block> <subblock> <address>
Description:
Read register address.
<block> : Block identifier, 0-7 or 0x0-0x7.
<subblock> : Sub block identifier: 0-15 or 0x0-0xf.
<address> : Register address within block, 0-255 or 0x00-0xff.
To Previous Page
Loading...
Need help?
General
